Inspection Mode 2
| DTC | Item | Note |
|---|---|---|
| B1412 | IMMOBILIZER CONTROL MODULE CAN REGISTER STUCK | - |
| B1414 | IMMOBILIZER CONTROL MODULE NON-VOLATILE MEMORY | - |
Diagnostic procedure:
- Perform the Clear Memory Mode. Ref. IMMOBILIZER (DIAGNOSTICS)>Clear Memory Mode .
- Read the DTC and check that the DTC is not displayed. Ref. IMMOBILIZER (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Disconnect and reconnect the battery, and then wait for one minute or more.
- Turn the ignition switch to ON.
- Read the DTC and check that the DTC is not displayed. Ref. IMMOBILIZER (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.