LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Outback 2.5i Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Rear Gate Opener Button >> Removal

Rear Gate Opener Button: Removal

NOTE:
  • The button - opener rear gate is integrated with the rear lock button.
  • Open the panel - rear gate before disconnecting the ground terminal from battery sensor.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel - rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>REMOVAL .
  3. Remove the garnish assembly - rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Garnish>REMOVAL .
  4. Remove the button - opener rear gate.
    1. Remove the garnish switch bracket from the garnish assembly - rear gate.
    2. While pushing the locks at both ends of the button - opener rear gate with a flat tip screwdriver, remove the button - opener rear gate together with the rear lock button.
    G10272926Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals