LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Transfer Clutch >> Installation

Transfer Clutch: Installation

  1. Install the thrust bearing.
    NOTE: Make sure to install in the right direction.
    Fig 1: Installing Thrust Bearing
    G10218706Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer clutch assembly.
    Fig 2: Installing Transfer Clutch Assembly
    G08317898Courtesy of SUBARU OF AMERICA, INC.
  3. Select the transfer driven gear shim. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Transfer Clutch>ADJUSTMENT .
  4. Attach the selected transfer driven gear shim to extension case with vaseline.
  5. Remove the transfer clutch assembly.
  6. Install the seal ring to the transfer clutch assembly.
    NOTE:
    • Use new seal rings.
    • When installing the seal rings, do not expand the seal rings too much.
    • Apply CVTF to the seal rings.
    Fig 3: Locating Seal Ring
    G08317900Courtesy of SUBARU OF AMERICA, INC.
  7. Install the seal ring to the transfer driven gear assembly.
    NOTE:
    • Use new seal rings.
    • When installing the seal rings, do not expand the seal rings too much.
    • Apply CVTF to the seal rings.
    Fig 4: Locating Seal Ring To Transfer Driven Gear Assembly
    G08317901Courtesy of SUBARU OF AMERICA, INC.
  8. Install the transfer clutch assembly.
  9. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Extension Case>INSTALLATION .
  10. Install the transmission assembly to the vehicle. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Automatic Transmission Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals