LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Oil Pump >> Installation

Oil Pump: Installation

  1. Install the O-rings.
    NOTE:
    • Use new O-rings.
    • Apply CVTF to the O-rings.
    Fig 1: Identifying O-Rings
    G08318182Courtesy of SUBARU OF AMERICA, INC.
  2. Install the plate and the oil pump.
    NOTE: Apply CVTF to the bolt.

    Tightening torque: 

    8.5 N.m (0.9 kgf-m, 6.3 ft-lb)

    Fig 2: Locating Oil Pump And Plate Bolts
    G11256035Courtesy of SUBARU OF AMERICA, INC.
  3. Install the oil pump chain cover. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Oil Pump Chain>INSTALLATION .
  4. Install the torque converter assembly. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Torque Converter Assembly>INSTALLATION .
  5. Install the transmission assembly to the vehicle. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION(TR580)>Automatic Transmission Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals