LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Entertainment System) >> Data Communication Module >> Removal >> Backup Battery

Backup Battery

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the data communication module. Ref. to ENTERTAINMENT & MONITORING>Data Communication Module>REMOVAL>DATA COMMUNICATION MODULE 
  3. Remove the backup battery.
    1. Remove the screws, and then remove the battery cover.

      Preparation tool:

      TORX® T10

    2. Disconnect the connector and remove the backup battery.
      G10309167Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals