LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Intake System (Induction)) >> Air Intake Boot >> Installation

Air Intake Boot: Installation

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the PCV hose and set the air intake boot.
  2. Install the clips, and tighten the clamps.

    Tightening torque: 

    3 N.m (0.3kgf-m, 2.2ft-lb) 

scientia non olet · About LEMON Manuals