LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Speed Control System) >> Accelerator Pedal >> Inspection >> Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Subaru Select Monitor.
  2. Turn to IG ON.
  3. Read the accelerator opening angle and the main accelerator sensor voltage using Subaru Select Monitor.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help". Ref. to ENGINE (DIAGNOSTICS) (H4DO)>DATA MONITOR .
Accelerator pedal sensor Accelerator pedal opening angle Standard
Main 0.0% 0.3-1.1 V
100.0% 2.3-3.8 V
Sub 0.0% 0.3-1.1 V
100.0% 2.3-3.8 V
scientia non olet · About LEMON Manuals