LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Vehicle Dynamics Control (VDC) System) >> Front ABS Wheel Speed Sensor >> Installation

Front ABS Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be careful not to damage the sensor.
  • Do not apply excessive force to the sensor harness.
  1. Install the front ABS wheel speed sensor.

    Tightening torque: 

    Front ABS wheel speed sensor: 7.5N.m (0.8kgf-m, 5.5ft-lb)

  2. Install the front wheels.

    Tightening torque: 

    Front wheel: 120 N.m (12.2kgf-m, 88.5ft-lb)

  3. Lower the vehicle.
    NOTE: Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering.
  4. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals