LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control/Fuel System) >> Camshaft Position Sensor >> Removal >> Intake Side

Intake Side

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. (RH side only) Ref. to INTAKE (INDUCTION) (H4DO)>Air Intake Duct>REMOVAL .
  3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
    • RH side
      G11252883Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      G11252884Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals