LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Wagon, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment & Monitoring System >> Data Communication Module >> Removal >> Data Communication Module

Data Communication Module

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille assembly - CTR ventilation. Ref. to AIR CONDITIONER>Air Vent Grille>REMOVAL>CENTER GRILLE ASSEMBLY .
  3. Remove the audio assembly or navigation assembly. Ref. to ENTERTAINMENT & MONITORING>Audio>REMOVAL .
  4. Remove the data communication module.
    1. Remove the screws.
    2. Remove the audio bracket or navigation bracket, and then remove the data communication module.
    CAUTION: Do not drop or apply any impact to the data communication module.
    Fig 1: Removing Data Communication Module
    G11246757Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Remove the screws on RH side in the same procedure as on the LH side.
scientia non olet · About LEMON Manuals