Stabilizer Bushing

Before installation, inspect the following items and replace any faulty part with a new one.
Check the stabilizer bushing for abnormal cracks, fatigue or damage.
Install the bushing - stabilizer.
Install the clamp - stabilizer bushing.
CAUTION: Install the clamp - stabilizer bushing with the arrow mark facing the front of the vehicle.

Fig 1: Installing Stabilizer Bushing Clamp
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the front exhaust pipe. Ref. to EXHAUST (H4DO)>Front Exhaust Pipe>INSTALLATION .
Install the crossmember support - rear. Ref. to FRONT SUSPENSION>Crossmember Support>INSTALLATION .
Install the under cover - front.
Tightening torque:

18N.m (1.8 kgf-m, 13.3 ft-lb)