LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Impreza Base, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Front Strut >> Removal

Front Strut: Removal

  1. Lift up the vehicle, and then remove the front wheels.
  2. Remove the left and right stabilizer links (upper part).
    Fig 1: Locating Upper Left And Right Stabilizer Links
    G11253826Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the brake hose bracket.
    Fig 2: Locating Brake Hose Bracket
    G11253827Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ABS wheel speed sensor.
    Fig 3: Locating ABS Wheel Speed Sensor
    G11253828Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the strut assembly.
  1. Place an alignment mark (a) on the adjusting bolt and the strut.
  2. Remove the adjusting bolts and flange bolts for the strut assembly.
    CAUTION: While holding the adjusting bolt side, tighten the nut side.
    Fig 4: Locating Strut Assembly Adjusting Bolt And Strut Alignment Mark
    G11253829Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the three nuts securing strut mount to body.
Fig 5: Locating Strut Mount Nuts
G11253830Courtesy of SUBARU OF AMERICA, INC.