Engine Oil Temperature Sensor: Installation

WARNING: This page is about a different car, the 2018 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

Set a new gasket, install the engine oil temperature sensor to the chain cover using the ST.
NOTE: STRUT MOUNT SOCKET (20099PA000) can also be used.

Preparation tool:

ST: STRUT MOUNT SOCKET (20399AG000)

Tightening torque:

16 N.m (1.6kgf-m, 11.8ft-lb)
Connect the connector to the engine oil temperature sensor.
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .