| ABS Sequence Control Mode |
Operate the valve and pump motor continuously to perform the ABS sequence control. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>ABS Sequence Control
. |
| VDC Function Check Mode |
Operate the valve and pump motor continuously to perform the VDC sequence control. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Sequence Control
. |
| Brake Lamp Lighting Operation |
Forcibly activate the brake light relay to illuminate the brake light. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>Brake Lamp Relay>OPERATION>BRAKE LAMP LIGHTING OPERATION MODE BY SUBARU SELECT MONITOR
. |
| VSC(VDC) Centering Mode |
Set the steering angle sensor neutral position, and the lateral G sensor and longitudinal G sensor 0 (zero) point. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDC Control Module & H/U)>ADJUSTMENT>VDC SENSOR MIDPOINT SETTING MODE
. |
| Reading of parameter: Engine Control Module to SSM |
Read VDC Control Module parameter data. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER READING
. |
| Writing of parameter: SSM to Engine Control Module |
Write the parameter data to the VDC Control Module. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER WRITING
. |
| Selection of Parameter |
Select and register parameters in the VDC Control Module. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER SELECTION
. |
| Confirm on parameter |
Parameters registered in the VDC Control Module are displayed. |
Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC Control Module and Hydraulic Control Unit (VDC Control Module & H/U)>MAINTENANCE MODE>VDC Control Module PARAMETER CHECK. |