Drive Cycle X
WARNING: This page is about a different variant/trim than selected.
| DTC | Item | Condition | Number of driving cycles on the detecting condition |
|---|---|---|---|
| P2004 | TGV CONTROL STUCK OPEN BANK 1 | - | 1 |
| P2005 | TGV CONTROL STUCK OPEN BANK 2 | - | 1 |
| P2006 | TGV CONTROL STUCK CLOSED BANK 1 | - | 1 |
| P2007 | TGV CONTROL STUCK CLOSED BANK 2 | - | 1 |
Diagnostic procedure:
- Idle the engine for 10 seconds or more after engine start.
- Shift the select lever to "P" range, and let the engine race for 10 seconds or more.NOTE: Keep Engine speed at 3500 rpm or more.
- Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Read Diagnostic Trouble Code (DTC)>OPERATION .