Drive Cycle O

WARNING: This page is about a different variant/trim than selected.

DTC	Item	Condition	Number of driving cycles on the detecting condition
P0441	EVAP SYSTEM (CPC) INCORRECT PURGE FLOW	-	2

WARNING: When performing drive cycle Ω on a public road, pay sufficient attention to the traffic condition and give the highest priority to safe driving.

Diagnostic procedure:

Drive according to the drive pattern described below.

Courtesy of SUBARU OF AMERICA, INC.
Park the vehicle on a safe place.
NOTE: Driving method while vehicle is driven to a stop at safe place is not restricted.
With the vehicle idling, read the temporary diagnostic code of DTC using Subaru Select Monitor or general scan tool.
NOTE:
- For detailed operation procedures, refer to "Read Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>READ DIAGNOSTIC TROUBLE CODE (DTC) .
- In the step 3), if the DTC is not displayed on the Subaru Select Monitor or general scan tool display screen, the trouble is resolved.