LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control/Fuel Injection System (H4DOTC)) >> Tumble Generator Valve Assembly >> Removal

Tumble Generator Valve Assembly: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: The tumble generator valve assembly is tightened together with the intake manifold.
  1. Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
  2. Disconnect the ground cable from battery.
  3. Open the fuel filler lid and remove the fuel filler cap.
  4. Remove the intake manifold. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Intake Manifold>REMOVAL .
  5. Remove the air intake adapter from the cylinder head.
    • RH side
      G12508899Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      G12508900Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the cylinder head plate from cylinder head.
    G12508901Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals