LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control/Fuel Injection System (H4DOTC)) >> Engine Wiring Harness >> Removal

Engine Wiring Harness: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Release the fuel pressure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel>PROCEDURE>RELEASING OF FUEL PRESSURE .
  2. Disconnect the ground cable from battery.
  3. Open the fuel filler lid and remove the fuel filler cap.
  4. Remove the intake manifold. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Intake Manifold>REMOVAL .
  5. Disconnect the connector from the engine.
    • Structural diagram 1
      G12508968Courtesy of SUBARU OF AMERICA, INC.
    • Structural diagram 2
      G12508969Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the engine wiring harness.
    G12508970Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals