LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control/Fuel Injection System (H4DOTC)) >> Electronic Throttle Control Relay >> Inspection

Electronic Throttle Control Relay: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that the electronic throttle control relay has no deformation, cracks or other damages.
  2. Measure the resistance between electronic throttle control relay terminals.
    G12509044Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Standard
    1 and 2 1 MΩ or more
    3 and 4 93.8-136.4 Ω (when 20°C (68°F))
  3. Connect battery positive terminal to terminal No. 3 and battery ground terminal to terminal No. 4, and measure the resistance between the electronic throttle control relay terminals.
    G12509045Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Standard
    1 and 2 Less than 1 Ω
scientia non olet · About LEMON Manuals