DTC U0423: Invalid Data Received From Instrument Panel Cluster Control Module

DTC detecting condition: 

Defective data was transmitted from combination meter.

Trouble symptom: 

Display of combination meter does not operate properly.

1. CHECK CAN COMMUNICATION HARNESS  .

   Perform the basic diagnostic procedure to check for fault in CAN communication harness. Ref. to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure .

   Was the basic diagnostic procedure performed up to step  7?

   Yes: Go to  2.

   No: Perform the basic diagnostic procedure. Ref. to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure .

2. CHECK DTC (OTHER THAN U-CODE)  .

   Check the displayed DTC.

   Is DTC other than U*** displayed?

   Yes: Perform the diagnosis for DTCs other than the displayed U-code.

   No: Go to  3.

3. CHECK DTC (U-CODE)  .

   Check the displayed DTC.

   Is DTC for the bus off or the data no-receive displayed?

   Yes: Perform the diagnosis for DTCs for the displayed bus off or the data no-receive.

   No: Go to  4.

4. CHECK DTC (CURRENT MALFUNCTION)  .

   Check the displayed DTC.

   Is U0423 a current malfunction?

   Yes: Go to  5.

   No: Go to  7.

5. CHECK DTC (CURRENT MALFUNCTION)  .
   1. Turn the ignition switch to OFF.
   2. Disconnect the combination meter connector.
   3. Connect the disconnected connectors.
   4. Read the DTC using Subaru Select Monitor. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

   Is U0423 a current malfunction?

   Yes: Go to  6.

   No: Go to  7.

6. CHECK DTC  .

   Using the Subaru Select Monitor, read DTC of all the systems. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

   Is U0423 detected in several modules?

   Yes: Replace the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER .

   No: Replace the module that the DTC has been detected.

7. CHECK HARNESS  .
   1. Shake the harness, and check for poor contact.
   2. Using the Subaru Select Monitor, read DTC of CAN system. Ref. to LAN SYSTEM (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .

   Is U0423 a current malfunction?

   Yes: Repair the poor contact of harness, or replace the harness.

   No: Go to  7.

8. CHECK CONNECTOR  .

   Check the connector used for high speed CAN for poor contact.

   Is there poor contact of connector?

   Yes: Repair the connector that has poor contact, or replace harness.

   No: It is possible that temporary poor communication occurs. Delete the DTC. Ref. to LAN SYSTEM (DIAGNOSTICS)>Clear memory .