Active Test: Operation
CAUTION:
- Be sure to perform the active test while the engine is not running.
- After executing the active test, perform the memory clear. Ref. to TRANSMISSION (DIAGNOSTICS)>CLEAR MEMORY .
- On [Start] display, select [Diagnosis].
- On [Vehicle selection] display, enter vehicle information and select [OK].
- On [Main Menu] display, select [Each System].
- On [Select System] display, select [Transmission].
- On [Select Function] display, select [Active Test].
| Item | Subaru Select Monitor display | Execution condition |
|---|---|---|
| Activating the actuator ON/OFF | F&R Clutch Solenoid | When all of the following conditions are met:
|
| Secondary Solenoid | ||
| Primary Down Solenoid | ||
| Primary Up Solenoid | ||
| AWD Solenoid | ||
| Lock-up duty solenoid | ||
| Lock-Up ON/OFF Solenoid |
NOTE:
For detailed operation procedures, refer to "Application help".