Turbine Speed Sensor: Installation
CAUTION:
Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.
Install in the reverse order of removal.
NOTE:
- Use new O-rings.
- Apply CVTF to the O-ring.
Tightening torque:
Turbine speed sensor
7 N.m (0.7 kgf-m, 5.2 ft-lb)
Under cover front - transmission
18 N.m (1.8 kgf-m, 13.3 ft-lb)