| Circuit tester |
Used for measuring resistance, voltage and current. |
| Thickness gauge |
Used for measuring the clearance in reverse brake, forward clutch and transfer clutch. |
| Caliper |
Used for measuring the dimension. |
| Spring scale |
Used for measuring the starting torque of the drive pinion. |
| TORX® bit T40 |
Used for removing and installing the secondary pressure (line pressure) test plug and plug. |
| TORX® bit T70 |
Used for removing and installing differential gear oil drain plug. |
| STRAIGHT PIN REMOVER |
Used for removing and installing the straight pin and spring pin. |
| Push/pull gauge |
Used for measuring clutch clearance. |
| Angle gauge |
Used for installing the drive plate. |
| TONE 3/8 6-point 27 mm deep socket (manufacturer product No. 3SEN-27) |
Used for removing and installing the secondary pressure sensor. |
| DST-i |
Used together with Subaru Select Monitor 4. |