Rear Trailing Link: Installation
CAUTION:
- Be sure to use a new self-locking nut.
- Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
- Install each part in the reverse order of removal.
Tightening torque:
Trailing link - rear sub frame assembly: 90 N.m (9.18 kgf-m, 66.4 ft-lb)
Trailing link - housing assembly - rear axcel: 90 N.m (9.18 kgf-m, 66.4 ft-lb)
- Install the rear wheels.
Tightening torque:
120 N.m (12.24 kgf-m, 88. ft-lb)