LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.5i Premium, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Diagnostics) >> Subaru Select Monitor >> Operation >> Parameter Check

Parameter Check

NOTE: The parameter data registered in the VDCCM is shown on the display.
  1. Connect the Subaru Select Monitor.
  2. On [Start] display, select [Diagnosis].
  3. On [Vehicle selection] display, enter vehicle information and select [OK].
  4. On [Main Menu] display, select [Each System].
  5. On [Select System] display, select [Brake Control].
  6. On [Select Function] display, select [Work Support].
  7. On [Work Support] display, select [Confirm on parameter].
  8. On the [Confirm on parameter] display screen, check that the applied model and grade of the target vehicle are included, and click "OK".
  9. If the applied model and grade of the target vehicle are not included on the [Confirm on parameter] display, perform "parameter selection and registration". Ref. to BRAKE CONTROL (DIAGNOSTICS)>Subaru Select Monitor>OPERATION>PARAMETER SELECTION .
scientia non olet · About LEMON Manuals