Freeze Frame Data
- On [Start] display, select [Diagnosis].
- On [Vehicle selection] display, enter vehicle information and select [OK].
- On [Main Menu] display, select [Each System].
- On [Select System] display, select [Brake Control].
- On [Select Function] display, select [DTC].
- On [DTC] display, select [FFD].
| Display | Contents to be displayed | Unit of measure |
|---|---|---|
| Classification | The recorded failure code is displayed. | - |
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Vehicle Speed Sensor | Vehicle speed calculated by VDC control module is displayed. | km/h or MPH |
| Steering Angle Sensor | Steering angle detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Pressure Sensor | Brake fluid pressure detected by pressure sensor is displayed. | bar |
| Longitudinal G Sensor | Vehicle forward/reverse acceleration detected by the forward/reverse G sensor is displayed. | m/s2 |
| Lateral G Sensor | Vehicle lateral acceleration detected by lateral G sensor is displayed. | m/s2 |
| Power Supply Voltage | Voltage supplied to VDC control module is displayed. | V |
| Acceleration Pedal Position | Accelerator pedal opening angle is displayed. | % |
| Engine Speed | Engine speed on malfunction occurrence is displayed. | rpm |
| FL Wheel Cylinder Pressure Sensor Output | FL wheel cylinder brake fluid pressure detected by pressure sensor is displayed. | bar |
| FR Wheel Cylinder Pressure Sensor Output | FR wheel cylinder brake fluid pressure detected by pressure sensor is displayed. | bar |
| Steering angle flag | Whether the absolute angle of the steering angle sensor was determined is displayed. | Recognition in progress or failed |
| EBD Control Flag | EBD control condition is displayed. | ON or OFF |
| ABS Control Flag | ABS control condition is displayed. | ON or OFF |
| TCS Control Flag | TCS control condition is displayed. | ON or OFF |
| VDC Control Flag | VDC control condition is displayed. | ON or OFF |
| E/G Control Stop Flag | Engine control command signal is displayed. | 1 or 0 |
| X Mode | The status of X mode is displayed. | ON or OFF |
| OFF Switch Detection | ON/OFF condition of the VDC operated by the driver is displayed. | ON or OFF |
| Brake Light Switch | Brake ON/OFF is displayed. | ON or OFF |
| Clutch switch | Clutch ON/OFF is displayed. (For MT model only. For AT model: OFF fixed) | ON or OFF |
| Reverse Signal | Reverse gear ON/OFF is displayed. (For MT model only. For AT model: OFF fixed) | ON or OFF |
NOTE:
- Freeze frame data stored at the time of trouble occurrence is shown on the display.
- Each time a trouble occurs, the latest information is stored in the freeze frame data in memory.
- For detailed operation procedures, refer to "Application help".