LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (M/T Clutch System) >> Operating Cylinder >> Removal

Operating Cylinder: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Brake fluid spilled on the vehicle body will harm the paint surface; therefore, wash it off with water and wipe clean quickly if spilled.
  1. Remove the clip (A) from the air intake boot.
  2. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).
  3. Loosen the clamp (C) which connects the air intake boot and throttle body.
    G12515360Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the air intake boot from the throttle body, and move it to the left side wheel apron.
    G12515361Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the clutch hose.
    CAUTION: Cover the hose joint to prevent the brake fluid from flowing out.
    G12515362Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the operating cylinder.
    G12515363Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals