LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Forester 2.0XT Touring >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Manual Transaxle & Differential) >> Front Differential Assembly >> Disassembly >> Differential Case Assembly

Differential Case Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the twelve bolts and remove hypoid driven gear.
    G12516365Courtesy of SUBARU OF AMERICA, INC.
  2. Drive out the straight pin from differential assembly toward hypoid driven gear side.

    ST 899904100 STRAIGHT PIN REMOVER

    G12516366Courtesy of SUBARU OF AMERICA, INC.
  3. Pull out the pinion shaft, and remove the differential bevel pinion, differential bevel gear and adjusting washer.
    G12516367Courtesy of SUBARU OF AMERICA, INC.
  4. Using the ST, remove the taper roller bearing.

    ST 899524100 PULLER SET

    G12516368Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals