LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Crosstrek Premium, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Front Arm >> Removal >> CROSSTREK Model

CROSSTREK Model

  1. Lift up the vehicle, and then remove the front wheels.
  2. Remove the under cover - front. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  3. Remove the crossmember support - rear. Ref. to FRONT SUSPENSION>Crossmember Support>REMOVAL .
  4. Remove the front arm assembly.
    1. Pull out the cotter pin (a), and remove the castle nut (b).
    2. Lower the front arm assembly, and remove the ball stud.
      G12400578Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the front arm plate.
      G12400579Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the front arm assembly.
      G12400580Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals