CROSSTREK Model

Apply seal material to the bolt threads of oil pressure switch, and install the oil pressure switch.
NOTE: Before applying the seal material, degrease the oil pressure switch and the thread portions of the chain cover.

Seal material:

THREE BOND 1324 (Part No. 004403042) or equivalent

Tightening torque:

18 N.m (1.8kgf-m, 13.3ft-lb)
Connect the terminal, and attach the rubber cap.
Tightening torque:

1.5N.m (0.2kgf-m, 1.1ft-lb)

NOTE: Fix the terminal within the range of 90° as shown in the figure.

Courtesy of SUBARU OF AMERICA, INC.
Check the engine oil level and replenish the engine oil if necessary. Ref. to LUBRICATION (H4DO)>Engine Oil>INSPECTION .
Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .