LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Crosstrek Premium, Automatic CVT Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle - Service Information >> Secondary Pressure Sensor >> Removal

Secondary Pressure Sensor: Removal

CAUTION:
  • Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.
  • When secondary pressure sensor is removed, CVTF leaks. After installing the secondary pressure sensor, adjust the CVTF level.
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
  2. Lift up the vehicle.
  3. Remove the secondary pressure sensor connector.
  4. Remove the secondary pressure sensor.
    G08317807Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals