Reduction Driven Gear: Assembly

Using the ST, install the parking gear.
Preparation tool:

ST: INSTALLER (499757002)

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the transfer drive gear.
Preparation tool:

ST: INSTALLER (499757002)

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the ball bearing.
NOTE: Use a new ball bearing.

Preparation tool:

ST: BUSHING 1-2 INSTALLER (499277100)

Courtesy of SUBARU OF AMERICA, INC.
Using the ST1, ST2 and ST3, counter the rotation of the reduction driven gear assembly, and install the lock nut.
NOTE: Use a new lock nut.

Preparation tool:

ST1: PULLEY WRENCH (18355AA000)

ST2: PULLEY WRENCH PIN SET (18334AA000)

ST3: SOCKET WRENCH (35) (499987003)

Tightening torque:

95 N.m (9.7kgf-m, 70.1ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Crimp the lock nut at four locations so that the dimension of A becomes 18.9 mm (0.74in) or less.
CAUTION: Do not allow the lock nut to be cracked during crimping operation.

Courtesy of SUBARU OF AMERICA, INC.