LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Front Suspension System And Wheel Alignment >> Wheel Alignment >> Adjustment >> Front Camber

Front Camber

  1. Adjust the camber angle to the following value.
    Model  Camber (difference between RH and LH 35' or less) 
    Impreza model -0°30'±0°30'
    Crosstrek model 0°00'±0°30'
  2. Loosen the two self-locking nuts while holding the strut bolts.
  3. Turn the camber adjusting bolt so that the camber is set at specification.
    NOTE: Moving the adjusting bolt by one scale changes the camber by approximately 0°10'.
    G12400547Courtesy of SUBARU OF AMERICA, INC.
    To increase camber.
    Rotate the left side counterclockwise. Rotate the right side clockwise.
    G12400548Courtesy of SUBARU OF AMERICA, INC.
    G12400549Courtesy of SUBARU OF AMERICA, INC.
    To decrease camber.
    Rotate the left side clockwise. Rotate the right side counterclockwise.
    G12400549Courtesy of SUBARU OF AMERICA, INC.
    G12400548Courtesy of SUBARU OF AMERICA, INC.
  4. Tighten two new self-locking nuts.

    Tightening torque: 

    155 N.m (15.8kgf-m, 114.3ft-lb) 

    NOTE: While holding the adjusting bolt side, tighten the nut side.
scientia non olet · About LEMON Manuals