LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Ignition Key Lock >> Inspection

Ignition Key Lock: Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G08319264Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    Between all terminals (A) LOCK 1 MO or more
    2-4 (B) ACC Less than 1 Ω
    1-2-4
    5-6    		 (C) ON Less than 1 Ω
    1-3-4
    5-6-7    		 (D) ST Less than 1 Ω
  2. Replace the ignition switch assembly if the inspection result is not within the standard.
scientia non olet · About LEMON Manuals