Freeze Frame Data: List
| Item | Content | Standard/Unit | Note |
|---|---|---|---|
| BATT voltage (control) | Constant power supply from the battery. Input value to the body integrated unit. | 0-21.5 V | - |
| BATT voltage (BACKUP) | Constant power supply from the battery. Input value to the body integrated unit. | 0-21.5 V | - |
| IGN voltage | IG system circuit voltage. Input value to the body integrated unit. | 0-21.5 V | - |
| ACC voltage | ACC system circuit voltage. Input value to the body integrated unit. | 0-21.5 V | - |
| Front Wheel Speed | Front wheel average speed. CAN data input value. Received from the VDC CONTROL MODULE. | km/h | - |
| Shift Position | Shift position. CAN data input value. Received from the TCM. | 1-3, D-S, D, N, R, P | - |
| Buzzer beeping request | Passenger room buzzer beeping request. CAN data output value. Sent to the combination meter. | Status for 'beeping deactivated' Reverse warning Key warning buzzer Light Remained Buzzer Customize 1 Customize 2 Registration completed 1 Registration completed 2 registered Registration NG |
- |
| EPB operating status | EPB operating status. CAN data input value, received from the VDC. | Error Released Operate Operating Releasing Parking |
- |
| Illumination Sensor Output | Output voltage from the illumination sensor. Body integrated unit input value. | 0-5 V | - |
| Off delay time | Interior light off delay time. Body integrated unit custom setting values. | OFF 10 Sec 20 Sec 30 Sec |
- |
| Auto Light Sensitivity Adjustment | Sensitivity of auto light function. Body integrated unit custom setting values. | Dull Normal Sensitive Very sensitive |
- |
| Key-lock Warning SW | Key warning switch ON/OFF status. Body integrated unit input value. Set to ON when the ignition key is inserted. | ON/OFF | Model without keyless access with push button start system |
| ACC Input | ACC ON/OFF status. Body integrated unit input value. Set to ON when the ignition switch is turned to ACC. | ON/OFF | Model with keyless access with push button start system |
| Stop Light Switch | Brake switch ON/OFF status. Body integrated unit input value. Set to ON when the brake pedal is pressed. | ON/OFF | - |
| Front fog lamp SW input | Front fog light switch ON/OFF status. Body integrated unit input value. Set to ON when the front fog light switch is ON. | ON/OFF | - |
| Driver's door SW input | Driver's door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| P-door SW input | Passenger's door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear right door SW input | Rear right door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| Rear left door SW input | Rear left door switch ON/OFF status. Body integrated unit input value. Set to ON when the door is open. | ON/OFF | - |
| R Gate SW input | Rear gate/trunk switch ON/OFF status. Body integrated unit input value. Set to ON when the rear gate/trunk is open. | ON/OFF | - |
| Manual lock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to lock. | ON/OFF | - |
| Manual unlock SW input | ON/OFF status of the manual lock switch located on the power window main switch (or on the passenger's side power window switch). Body integrated unit input value. Set to ON when the manual lock switch is set to unlock. | ON/OFF | - |
| P SW | P range switch ON/OFF status. Body integrated unit input value. Set to ON in the P range. | ON/OFF | - |
| MT Reverse SW | MT back-up light switch ON/OFF status. Body integrated unit input value. Set to ON when the shift lever is set to R range and the back-up light switch is ON. | ON/OFF | - |
| R wiper ON SW input | Rear wiper ON switch ON/OFF status. Body integrated unit input value. Set to ON when the rear wiper switch is ON. | ON/OFF | - |
| R wiper INT SW input | Rear wiper INT switch ON/OFF status. Body integrated unit input value. Set to ON when the rear wiper switch is in the INT position. | ON/OFF | - |
| R washer SW input | Rear washer switch ON/OFF status. Body integrated unit input value. Set to ON when the rear washer switch is ON. | ON/OFF | - |
| Rr Defogger SW | Rear defogger switch ON/OFF status. Body integrated unit input value. Set to ON when the rear defogger switch is ON. | ON/OFF | - |
| Fr wiper input | Front wiper return switch ON/OFF status. Body integrated unit input value. Set to ON when the front wiper is outside of the stop position. | ON/OFF | - |
| Parking Brake Lamp SW Signal | Parking brake switch ON/OFF status. Body integrated unit input value. Set to ON when the parking brake is pulled. | ON/OFF | - |
| Driver's seat lock status SW input | ON/OFF status of the driver's seat lock status switch. Body integrated unit input value. Set to ON when the door status is LOCK. | ON/OFF | Model with keyless access with push button start system |
| Passenger's seat lock status SW input | ON/OFF status of the passenger's seat lock status switch. Body integrated unit input value. Set to ON when the door status is LOCK. | ON/OFF | Model with keyless access with push button start system |
| R gate lock status SW input | ON/OFF status of the rear gate lock status switch. Body integrated unit input value. Set to ON when the rear gate status is LOCK. | ON/OFF | - |
| R Gate Release SW input | ON/OFF status of the rear gate release switch/trunk opener switch. Body integrated unit input value. Set to ON when the rear gate release switch/trunk opener switch is pressed. | ON/OFF | - |
| Rr Defogger output | Rear defogger relay output ON/OFF status. Body integrated unit output value. Set to ON when the rear defogger is activated. | ON/OFF | - |
| lock actuator LOCK output | Door lock actuator output ON/OFF status. Body integrated unit output value. Set to ON when a lock signal is output. | ON/OFF | - |
| All seat UNLOCK output | ON/OFF status of the all door lock actuator output. Body integrated unit output value. Set to ON when an all door unlock signal is output. | ON/OFF | - |
| D-seat UNLOCK output | ON/OFF status of the driver's door lock actuator output Body integrated unit output value. Set to ON when a driver's door/all door unlock signal is output. | ON/OFF | - |
| R gate/trunk UNLK output | Rear gate/trunk lock actuator ON/OFF status. Body integrated unit output value. Set to ON when an unlock signal is output. | ON/OFF | - |
| R wiper output | Rear wiper relay output ON/OFF status. Body integrated unit output value. Set to ON when the rear wiper is activated. | ON/OFF | - |
| Shift lock solenoid output | Shift lock solenoid output ON/OFF status. Body integrated unit output value. Solenoid is activated to set this item to ON when depressing the brake pedal with the shift lever in P range. | ON/OFF | - |
| Key lock solenoid output | Key lock solenoid output ON/OFF status. Body integrated unit output value. Solenoid is activated to set this item to ON when the key is inserted with the shift lever in other than P range. | ON/OFF | Model without keyless access with push button start system |
| wiper deicer output | Wiper deicer output ON/OFF status. Body integrated unit output value. Set to ON while the wiper deicer is operating. | ON/OFF | - |
| Keyless Buzzer Output | Keyless buzzer ON/OFF status. Body integrated unit output value. Set to ON while the keyless buzzer is sounding. | ON/OFF | - |
| Horn Output | Security horn output ON/OFF status. Body integrated unit output value. Set to ON while the horn is sounding due to a security breach. | ON/OFF | - |
| Room lamp output | Room light output ON/OFF status. Body integrated unit output value. Set to ON while the room light illuminates with the switch in DOOR position. | ON/OFF | - |
| key illumination lamp o/p | Key illumination light output ON/OFF status. Body integrated unit output value. Set to ON while the key illumination light illuminates. | ON/OFF | Model without keyless access with push button start system |
| Immobilizer lamp output | Security indicator output ON/OFF status. Body integrated unit output value. Set to ON while the security indicator in the combination meter illuminates. | ON/OFF | - |
| Small Light SW | Lighting 1 relay CAN output ON/OFF status. CAN data sending value. Set to ON when the position light indicator in the combination meter illuminates. | ON/OFF | - |
| Headlamp | Lighting Lo relay CAN output ON/OFF status. CAN data output value. Set to ON when the headlight Lo illuminates. | ON/OFF | - |
| High Beam | Lighting Hi relay CAN output ON/OFF status. CAN data output value. Set to ON when the headlight Hi illuminates. | ON/OFF | - |
| Lane change signal setting | Presence or absence of the one-touch blinker control. Body integrated unit custom setting values. | Support/Not Exist | - |
| Rear wiper auto setting | Presence or absence of the rear wiper control linked with reverse shift. Body integrated unit custom setting values. | Support/Not Exist | - |
| Left turn signal input | Left turn signal switch ON/OFF status. Body integrated unit input value. Set to ON while the left turn signal switch is ON. | ON/OFF | - |
| Right turn signal input | Right turn signal switch ON/OFF status. Body integrated unit input value. Set to ON while the right turn signal switch is ON. | ON/OFF | - |
| Left turn signal output | Left turn signal light output ON/OFF status. Body integrated unit output value. Set to ON while the left turn signal light illuminates. | ON/OFF | - |
| Right turn signal output | Right turn signal light output ON/OFF status. Body integrated unit output value. Set to ON while the right turn signal light illuminates. | ON/OFF | - |
| Driver's Door Unlock Setting | Presence or absence of the driver's seat select unlock control. Body integrated unit custom setting values. | Selection/ALL | Model with keyless access with push button start system |
| Rear Gate Unlock Setting | Presence or absence of the rear gate select unlock control. Body integrated unit custom setting values. | Selection/ALL | Model with keyless access with push button start system |
| Wiper link Auto Light Setup | ON/OFF status of the wiper interlock auto light function control. Body integrated unit custom setting values. |
ON/OFF | - |
| Steering Responsive Fog Lamp Setting | Presence/absence of SRF. Body integrated unit custom setting values. |
Support/Not Exist | - |
| Steering Responsive Fog Lamp OFF SW Input | ON/OFF status of SRF OFF switch. Body integrated unit custom setting values. |
ON/OFF | - |
| Steering Angle Sensor Signal | CAN data input value. Body integrated unit custom setting values. |
-3276.8-3276.8 deg | - |
| Steering Responsive Fog Lamp Mode | SRF OFF/ON/Fail status. | ON/OFF/Fail | - |
| Steering Responsive Fog Lamp (Right) Output | ON/OFF status of SRF (R) ON output. | ON/OFF | - |
| Steering Responsive Fog Lamp (Left) Output | ON/OFF status of SRF (L) ON output. | ON/OFF | - |
| Steering Responsive Fog Lamp (Right) CAN Output | SRF (R) output status. CAN data output value. | ON/OFF | - |
| Steering Responsive Fog Lamp (Left) CAN Output | SRF (L) output status. CAN data output value. | ON/OFF | - |
| Steering Responsive Fog Lamp Indicator Signal | SRF indicator status. CAN data output value. | Turn_OFF/Turn_ON/BLINK | - |
| High Beam Assist Function Setting (mirror/EyeSight) | Presence or absence of high beam assist. Body integrated unit custom setting values. |
Not Exist/mirror HBA/EyeSight HBA | - |
| Head Lamp Low Beam Specification | Headlight low beam light source type. Body integrated unit custom setting values. |
Halogen/HID/LED | - |
| Head Lamp High Beam Specification | Headlight high beam light source type. Body integrated unit custom setting values. |
Halogen/HID/LED | - |
| High Beam Assist Current Setting | Presence or absence of high beam assist. Body integrated unit custom setting values. |
ON/OFF | - |
| [High Beam Assist Indicator (Active/Blink)] | Set to ON when high beam assist is activated. CAN data output value. |
Turn_OFF/Turn_ON/Flashing | - |
| Lighting I Switch Input | Lighting 1 switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting 1 switch is ON. | ON/OFF | - |
| Lighting II Switch Input | Lighting 2 switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting 2 switch is ON. | ON/OFF | - |
| Lighting AUTO input | Lighting AUTO switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting AUTO switch is ON. | ON/OFF | - |
| Dimmer Hi Switch Input | Lighting Hi switch ON/OFF status. Body integrated unit input value. Set to ON while the lighting Hi switch is ON. | ON/OFF | - |
| Dimmer Pass Switch Input | Dimmer Pass switch ON/OFF status. Body integrated unit input value. Set to ON while the dimmer Pass switch is ON. | ON/OFF | - |
| Illumination sensor flag | Presence or absence of the illumination sensor. Body integrated unit internal data. | Support/Not Exist | - |
| Lighting I Lamp Output | Lighting 1 relay output ON/OFF status. Body integrated unit output value. Set to ON while the position light illuminates. | ON/OFF | - |
| Lighting II Lamp Output | Lighting Lo relay output ON/OFF status. Body integrated unit output value. Set to ON while the lighting Lo illuminates. | ON/OFF | - |
| Lighting Hi Lamp Output | Lighting Hi relay output ON/OFF status. Body integrated unit output value. Set to ON while the lighting Hi illuminates. | ON/OFF | - |
| Front Fog Lamp Output | Front fog light relay output ON/OFF status. Body integrated unit output value. Set to ON while the front fog light illuminates. | ON/OFF | - |
| Power Supply Transistor | Lighting power supply relay output ON/OFF status. Body integrated unit output value. Set to ON while the light illuminates with the key removed or while the key is inserted (including ACC and IGN ON). | ON/OFF | - |
| Map lamp output | Map light output ON/OFF status. Body integrated unit output value. Set to ON while the map light illuminates with the switch in DOOR position. | ON/OFF | - |
| Luggage/Trunk lamp output | Luggage/trunk light output ON/OFF status. Body integrated unit output value. Set to ON while the luggage/trunk light illuminates with the switch in DOOR position. | ON/OFF | - |
| Front washer switch input | ON when the front wiper washer switch is ON. Body integrated unit input value. |
ON/OFF | - |
| Rr Defogger op. mode | Status of the rear defogger operation mode. Body integrated unit custom setting values. | Continuous/Normal/15 minutes (normal) | - |
| Security Alarm Setup | Alarm ON/OFF status when the security system is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Impact Sensor Setup | Impact sensor ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Alarm delay setup | Alarm monitoring delay function ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Lockout prevention | Key lockout prevention function ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Impact sensor | Presence or absence of the impact sensor. Body integrated unit custom setting values. | Support/Not Exist | - |
| Answer-back buzzer setup | Answer-back buzzer sounding ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Hazard answer-back setup | Hazard answer-back ON/OFF status. Body integrated unit custom setting values. | ON/OFF | - |
| Door open warning | Presence or absence of the door open warning function. Body integrated unit custom setting values. | Support/Not Exist | - |
| Dome Light Alarm Setting | Room light illumination ON/OFF status when the alarm is activated. Body integrated unit custom setting values. | ON/OFF | - |
| Auto A/C Setting | Presence or absence of the A/C ECM. Body integrated unit custom setting values. | Support/Not Exist | - |
| wiperdeicer | Presence or absence of the wiper deicer. Body integrated unit custom setting values. | Support/Not Exist | - |
| Sedan/Wagon Setting | Vehicle type, Sedan/Wagon (OBK). Body integrated unit custom setting values. | Sedan/Wagon | - |
| MT/AT Setting | Transmission type, MT/AT (CVT). Body integrated unit custom setting values. | MT/AT | - |
| Destination Setting | Vehicle destination information. Body integrated unit internal data. | JP KA, KC KS EU LHD Other than KS Canada (C0, C5) USA (U4, U5, U6, C6) EK, ER | - |
| Illumination Sensor Setting | Presence or absence of the illumination sensor. Body integrated unit custom setting values. | Support/Not Exist | - |
| Factory initial setting | Status of the Factory/Market mode. Body integrated unit custom setting values. | Market/Factory | - |
| Trip Count | Time stamp information. | 0-65534 | Ref. to LAN SYSTEM (DIAGNOSTICS)>General Description>CAUTION>TIME STAMP . |
| Count | Time stamp information. | Common/Originally | |
| Time Count [msec] | Time stamp information. | 0-53687091000 | |
| Welcome Lighting (Exiting) | Time setting to turn off the light for the welcome lighting (exiting) function. Body integrated unit custom setting values. | OFF 30s 60 Sec 90 Sec | - |
| Welcome Light Off Delay Time (Approaching) | Time setting to turn off the light for the welcome lighting (approaching) function. Body integrated unit custom setting values. | OFF 30s 60 Sec 90 Sec | - |
| Keyless Buzzer Volume | Volume of the keyless buzzer. Body integrated unit custom setting values. | 1-7 | - |
| Hazard switch Input | Turn hazard switch input ON/OFF status. Body integrated unit input value. Set to ON when the turn hazard switch is ON. | ON/OFF | - |
| Auto Dimmer Cancel setting | Sensitivity of auto dimmer cancel function. Body integrated unit custom setting values. | 0 (OFF) Least Less Normal More Most |
- |