LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ tS >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel >> Installation

Steering Wheel: Installation

  1. Confirm that the front tires are in the straight-ahead position.
  2. Steering roll connector centering (Refer to INSTALLATION )
  3. Installation of steering pad switch (Refer to STEERING PAD SWITCH )
  4. Installation of the cruise control main switch (Refer to INSTALLATION )
  5. Installation of the transmission shift switch (with paddle shifter) (Refer to INSTALLATION )
  6. Installation of the steering wheel ASSY
    1. Line up the alignment marks and install the steering wheel ASSY onto the steering column ASSY.
    2. Install the nut.

      Standard value: T=39N.m {398kgf.cm} {28.8ft.lbf}

    3. Connect each connector to the steering roll connector.
  7. Installation of the driver's airbag module (Refer to INSTALLATION )
  8. Connection of the battery ground terminal Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
  9. Confirm the steering wheel ASSY center position.
  10. Inspection of airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )
  11. VDC sensor mid point setting (Refer to WORK SUPPORT )
scientia non olet · About LEMON Manuals