LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ tS >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

  1. Handling/working precautions
    WARNING: As this maintenance procedure may have an effect on the SRS airbag system, be sure to check the SRS airbag system precautions before commencing work. (Refer to SRS AIRBAG SYSTEM )
  2. Disconnection of the battery ground terminal
    WARNING: As the airbag and pretensioner system is equipped with a backup power supply, if you start work within 60 seconds of disconnecting the battery ground terminal, the airbag may accidentally deploy.
    CAUTION: To prevent damage to the moldings, completely wind down both the driver's and passenger's door windows.
  3. Removal of the driver's airbag module (Refer to DRIVER SIDE AIR BAG MODULE )
  4. Removal of steering pad switch ASSY
    1. Disconnect the connector from the spiral cable SUB-ASSY.
      G11260982Courtesy of SUBARU OF AMERICA, INC.
    2. Release the guide.
    3. Remove 2 screws.

      Standard value: T=1.75N.m {18kgf.cm} {1.3ft.lbf}

      G11260983Courtesy of SUBARU OF AMERICA, INC.
    4. Release the 4 tabs and remove the steering pad switch ASSY.
scientia non olet · About LEMON Manuals