Front Strut Tower Bar: Installation
- Installation of front strut tower bar LH
- Using a new bolt and three new nuts, install the front strut tower bar LH.
Standard value: T=16N.m {163kgf.cm} {11.8ft.lbf}
- Using a new bolt and three new nuts, install the front strut tower bar LH.
- Installation of flexible V-shaped bar LH (tS model)
- Using a new bolt and three new nuts, install the flexible V-shaped bar LH.
Standard value: T=16N.m {163kgf.cm} {11.8ft.lbf}
CAUTION: When installing the flexible V-shaped bar, face the boot to the center of the vehicle and adjust the direction so that the "STI" mark is visible.
- Using a new bolt and three new nuts, install the flexible V-shaped bar LH.
- Installation of front strut tower bar RHNOTE: Service the RH side in the same procedure as the LH side.
- Installation of flexible V-shaped bar RH (tS model)NOTE: Service the RH side in the same procedure as the LH side.