LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Transmission Shift Switch >> Unit Inspection

Unit Inspection

  1. Check of transmission shift switch
    1. Resistance inspection
      1. Measure the resistance between the terminals.

        Resistance

        Inspection terminals Inspection conditions Standard value
        3 - 4 Pull the shift switch lever RH (+) side. Less than 10 Ω
        Release the shift switch lever. 1 MΩ or more
        1 - 4 Pull the shift switch lever LH (-) side. Less than 10 Ω
        Release the shift switch lever. 1 MΩ or more
        G12587553Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals