LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System >> Front Stabilizer Bar >> Removal

Front Stabilizer Bar: Removal

  1. Removal of front tire
  2. Removal of undercover front AL (Refer to REMOVAL )
  3. Removal of undercover COMPL T/M (Refer to REMOVAL )
  4. Removal of under cover rear LH (Refer to REMOVAL Step 35)
  5. Removal of undercover front side rear LH
    1. Remove the three clips and remove the undercover front side rear.
    G12588549Courtesy of SUBARU OF AMERICA, INC.
  6. Removal of undercover front side rear RH
    NOTE: Remove the part in the same manner as LH side.
  7. Removal of front stabilizer link ASSY LH
    1. Secure the stud bolt and remove the nut.
    2. Remove the front stabilizer link ASSY LH from the front shock absorber w/coil spring.
      G12588550Courtesy of SUBARU OF AMERICA, INC.
    3. Secure the stud bolt and remove the nut.
    4. Remove the front stabilizer link ASSY LH from the stabilizer bar FR.
    G12588551Courtesy of SUBARU OF AMERICA, INC.
  8. Removal of front stabilizer link ASSY RH
    NOTE: Service the RH side in the same procedure as the LH side.
  9. Removal of flexible draw stiffener ASSY (tS model) (Refer to REMOVAL  )
  10. Removal of sub frame COMPL LH
    1. Remove the four bolts, and remove the sub frame COMPL LH with the stabilizer bar FR.
    G12588552Courtesy of SUBARU OF AMERICA, INC.
  11. Removal of sub frame COMPL RH
    NOTE: Service the RH side in the same procedure as the LH side.
  12. Removal of front stabilizer bracket No. 2 LH
    1. Remove the bolt and nut, and remove the front stabilizer bracket No. 2 LH.
    G12588553Courtesy of SUBARU OF AMERICA, INC.
  13. Removal of front stabilizer bracket No. 2 RH
    NOTE: Service the RH side in the same procedure as the LH side.
  14. Removal of stabilizer bar FR
    1. Remove the stabilizer bar FR.
  15. Removal of front stabilizer bar bushing No. 1 (installed on LH side)
    1. Remove the front stabilizer bar bushing No. 1 (installed on LH side) from the stabilizer bar FR.
  16. Removal of front stabilizer bar bushing No. 1 (installed on RH side)
    NOTE: Service the RH side in the same procedure as the LH side.