LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. Disposal of shock absorber ASSY FR LH
    1. Secure the shock absorber ASSY FR LH in a vertical position.
    2. Press down on the piston rod with hands by approximately 70mm {2.756in}.
    3. Using a saw, etc., slowly make a hole in the section shown in the figure to purge the gas.
      G12588534Courtesy of SUBARU OF AMERICA, INC.
      CAUTION:
      • Wear protective eye wear.
      • Since the gas pressure may spray metal chips, perform the procedure by covering the saw with a piece of cloth, etc.
      NOTE: Gas to be released is colorless, odorless, and harmless.
scientia non olet · About LEMON Manuals