Washer Tank: Installation
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of the windshield washer tank
- Using 2 new bolts, install the windshield washer tank.
Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
- Replace the inlet gasket with a new one, and install the holder & pipe SUB-ASSY.
- Install the clip.
Standard value: T=6N.m {61 kgf.cm} {4.4ft.lbf}
- Using 2 new bolts, install the windshield washer tank.
- Refilling washer fluid (Refer to INSTALLATION )
- Installation of the windshield washer motor & pump ASSY (Refer to INSTALLATION )
- Installation of the front bumper cover (Refer to INSTALLATION )