LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Control System (Service Information)) >> Engine Coolant Temperature Sensor (FA20) >> Removal

Engine Coolant Temperature Sensor (FA20): Removal

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
  2. Draining of coolant (SUBARU Super Coolant) (Refer to COOLANT (FA20) )
  3. Removal of intake manifold (Refer to REMOVAL )
    G12586442Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of engine water temperature sensor
    1. Disconnect the connector for engine water temperature sensor.
      G12586443Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the engine water temperature sensor and gasket.
scientia non olet · About LEMON Manuals