Crankshaft Position Sensor (FA20): Installation
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of crankshaft position sensor
- Using bolt, install the crankshaft position sensor.
Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf}
- Connect the connector for crankshaft position sensor.
- Using bolt, install the crankshaft position sensor.
- Vacuum tube connector hose connection (transmission M/T)
- Install the vacuum tube connector hose with the bolt.
Standard value: T=18N.m {184kgf.cm}
- Install the vacuum tube connector hose with the bolt.
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}