Steering Pad Switch: Installation
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of steering pad switch ASSY
- Fit in the 4 tabs and install the steering pad switch ASSY.
- Install the two screws.
- Fit in the guide.
- Connect the connector to the spiral cable SUB-ASSY.
- Installation of the driver's airbag module (Refer to INSTALLATION )
- Connection of the battery ground terminal Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
- Inspection of airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )