Door Control Transmitter (Without Smart Entry): Removal
- Removal of transmitter housing cover
- Using a flat tip screwdriver wrapped with protective tape, remove the transmitter housing cover.CAUTION: Do not pry the cover excessively.
- Using a flat tip screwdriver wrapped with protective tape, remove the transmitter housing cover.
- Removal of door control transmitter module set
- Remove the door control transmitter module set from the transmitter housing case.
- Removal of door control transmitter gasket
- Remove the door control transmitter gasket
- Removal of transmitter battery (Refer to TRANSMITTER BATTERY (WITHOUT SMART ENTRY) )