AUX Unit: Installation
- Installation of AUX unit ASSY
- Using the 2 screws, install the AUX unit ASSY to the radio receiver bracket or navigation receiver bracket.
- Connect the cable.
- Installation of navigation receiver ASSY
- Installation of the instrument cluster finish panel SUB-ASSY CTR (Refer to INSTALLATION , Step 16)
- Installation of the instrument panel ornament (Refer to INSTALLATION , Step 17)
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}
- Settings when removing/installing battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )