LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostics) (P000A To P015B) (2.5L) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0111 Intake Air Temperature Sensor 1 Circuit Range/Performance Bank 1 >> Diagnostic Method

Diagnostic Method

Judge as NG when Diagnosis 1 or Diagnosis 2 becomes NG.

Diagnosis 1 

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
|Intake air temperature 30 sec. after engine start - Engine coolant temperature at engine start| > Value of Map 3
|Intake air temperature 30 sec. after engine start - Ambient air temperature 30 sec. after engine start| > Value of Map 4
MAP SPECIFICATION 3

Ambient temperature °C (°F) -30 (-22) 30 (86) 45 (113) 60 (140)
|Intake air temperature 30 sec. after engine start - Engine coolant temperature at engine start| °C (°F) 12 (53.6) 12 (53.6) 22 (71.6) 22 (71.6)
MAP SPECIFICATION 4

Ambient temperature °C (°F) -30 (-22) 30 (86) 45 (113) 60 (140)
|Intake air temperature 30 sec. after engine start - Ambient air temperature 30 sec. after engine start| °C (°F) 20 (68) 20 (68) 32 (89.6) 32 (89.6)

Time Needed for Diagnosis:  Less than 1 second

Diagnosis 2 

Judge as NG when the following conditions are established.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria Threshold Value
Output voltage difference between Max. and Min. < 0.02 V (Equivalent to approximately 0.5°C (0.9°F) near 25°C (77°F))

Time Needed for Diagnosis:  Less than 1 second

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.