LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Mechanical (2.0L)) >> Chain Cover >> Assembly

Chain Cover: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the camshaft position sensor. <Ref. to INSTALLATION , Camshaft Position Sensor.>
  2. Install the oil control solenoid. <Ref. to INSTALLATION , Oil Control Solenoid.>
  3. Install the engine oil temperature sensor. <Ref. to INSTALLATION , Engine Oil Temperature Sensor.>
  4. Install the oil pressure switch. <Ref. to INSTALLATION , Oil Pressure Switch.>
  5. Install the PCV hose assembly No. 1. <Ref. to PCV HOSE ASSY NO. 1 , REPLACEMENT, PCV Hose Assembly.>
  6. Install the oil filler cap.
Fig 1: Locating Oil Filler Cap
G09480302Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals