LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (2.0L)) >> Knock Sensor >> Removal >> RH Side

RH Side

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover. <Ref. to REMOVAL , Collector Cover.>
  2. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Note.>
  3. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold.>
  4. Remove the fuel pipe insulator No. 3. <Ref. to FUEL PIPE INSULATOR NO. 3 , REMOVAL, Fuel Insulator.>
  5. Disconnect the connector (A) from the knock sensor, and remove the knock sensor from the cylinder block.
Fig 1: Locating Knock Sensor Bolt With Connector (RH Side)
G09479750Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals